BPVPH - CLUTCH FACING
- MSDS: BPVPH
- Manufacturer: RAYBESTOS PRODUCTS CO
- Product Name: CLUTCH FACING
- National Stock Number: 3010-00-830-8800
Product Identification
Product ID:CLUTCH FACING
MSDS Date:08/01/1992
FSC:3010
NIIN:00-830-8800
MSDS Number: BPVPH
Responsible Party
CRAWFORDVILLE, IN 47933-1958
US
Preparer: JIM PEARSON
Cage: 13475
Contractor
Telephone: 317-362-3500
Cage: 13475
Ingredients
CELLULOSE
CAS: 9004-34-6
RTECS: FJ5691460
Fraction By Weight: 28 - 48%
OSHA PEL 15 MG/M3 RTECS
ACGIH TLV: 10 MG/M3 RTECS
AMORPHOUS SILICA
CAS: 112945-52-5
RTECS: VV7310000
Fraction By Weight: 15 - 30%
ACGIH TLV: 1500 UG/M3 (MFR)
PHENOLIC RESIN,OIL MODIFIED
CAS: 9003-35-4
Fraction By Weight: 30 - 50%
NITRILE ELASTOMER
CAS: 9003-18-3
Fraction By Weight: 1%
Hazards
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:NONE IN SOLID FORM. IF THIS PRODUCT IS
DECOMPOSED TO DUST,IT IS A RESPIRATORY IRRITANT.
Explanation of Carcinogenicity:THERE ARE NO INGREDIENTS AT
CONCENTRATIONS OF 0.1% OR MORE WHICH ARE CONFIRMAED OR SUSPECTED
CARCINOGENS.
Effects of Overexposure:IF DECOMPOSED TO DUST- SNEEZING, COUGHING AND
POSSIBLE TROUBLE WITH BREATHING.
Medical Cond Aggravated by Exposure:HMIS SUGGESTS THAT PERSONS WITH
PRE-EXISTING RESPIRATORY DISORDERS MAY BE MORE SUSCEPTIBLE TO THE
EFFECTS OF THE DUST FROM THIS ITEM.
First Aid
First Aid:EYES:FLUSH WITH WATER FOR 15 MINUTES.HOLD EYELIDS
OPEN.INHAL:REMOVE TO FRESH AIR & PROVIDE OXYGEN/CPR IF
NEEDED.INGEST:FLUSH OUT MOUTH WITH WATER.SEEK MEDICAL ATTENTION IF
SYMPTOMS PERSIST OR WORSEN.
Fire Fighting
Extinguishing Media:FOAM
Fire Fighting Procedures:WEAR NIOSH-APPROVED SELF-CONTAINED BREATHING.
Unusual Fire/Explosion Hazard:NONE UNLESS DECOMPOSED TO DUST
(DURING)COMBUSTION.
Accidental Release
Spill Release Procedures:VACUUM(USING A HEPA FILTERED VACUUM) OR WET
CLEANING IF DUST IS INVOLVED.
Neutralizing Agent:NOT APPLICABLE.
Handling
Handling and Storage Precautions:STORE IN A COOL PLACE. USE WITH
ADEQUATE DUST CONTROL.
Other Precautions:DO NOT MAKE DUST. AVOID CONTACT OF WITH EYES AND
SKIN. USE RESPIRATORY PROTECTION IF DUST IS PRESENT.
Exposure Controls
Respiratory Protection:IF ENGINEERING CONTROLS ARE INADEQUATE TO
CONTROL VAPOR/DUST CONCENTRATIONS TO AN ACCEPTABLE LEVEL, A
NIOSH-APPROVED VAPOR/ DUST RESPIRATOR SHOULD BE WORN.
Ventilation:PROVIDE SUFFICIENT MECHANICAL (GENERAL AND/OR LOCAL
EXHAUST) VENTILATION TO MAINTAIN EXPOSURE BELOW TLV(S).
Protective Gloves:NONE NORMALLY REQUIRED.
Eye Protection:NONE NORMALLY REQUIRED.
Other Protective Equipment:HAVE EYE WASH STATION, EMERGENCY SHOWER,
AVAILABLE.IF DUST IS MADE USE APPROPRIATE CLOTHING TO PROTECT SKIN.
Work Hygienic Practices:WASH HANDS.SEPERATE WORK CLOTHES FROM STREET
CLOTHES.LAUNDER WORK CLOTHES BEFORE REUSE.DO NOT BRING FOOD INTO
WORK AREA.
Supplemental Safety and Health
THERE HAS BEEN A FORMULA CHANGE FROM THE PRIOR RECORD;NITRILE
RUBBER(1%) HAS BEEN ADDED.
Chemical Properties
HCC:V7
Appearance and Odor:LIGHT RED - ODORLESS
Stability
Stability Indicator/Materials to Avoid:YES
MANUFACTURER STATES NONE KNOWN.HMIS SUGGESTS STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:NONE KNOWN.
Hazardous Decomposition Products:DUST IS LIBERATED.
Conditions to Avoid Polymerization:MANUFACTURER STATES NONE IN SOLID
FORM.
Disposal
Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH LOCAL, STATE AND
FEDERAL REGULATIONS. RECOMMENDED METHOD IS BY INCINERATION OR
LANDFILL.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.